Home >> Products >> PE PP PVC EVA EVOH Blow Molding Machine »Giant-Blow Moulding Machine » 45YG2x1.1C Extrusion Blow Molding Machine

45YG2x1.1C Extrusion Blow Molding Machine

   This extrusion blowing molding machinery is designed for engineering part, with max blow volume of 30L, and out put of 45/hr, 1100 /day. Such bottle made from plastic resin of PP, PVC, PE, PC, PS is applicable for this machine.

Model: 90H1x1.30D

Features
1. The machine is with new platform design for the die head, which separates the lifting platform from head-rising platform, not only making the lifting and rising of the die head more stable, but also making the die head more easy to move forwards and backwards;
2. The main body is equipped with accumulator to avoid the explosive fissile convergence line that caused by parision combined in the material-storage-on-top accumulator;
3. Equipped with the double pump, proportion flow valve, the power consumption can be reduced effectively;
4. This 30L extrusion blowing molding machinery has automatic lubrication system, and robot hand, down widen device, down blow pin, double clamping also;
5. It could be optional configured with tele-maintenance system;
6. It’s driven by the air cylinder instead of the oil pump, with low noise and zero contamination
7. Double crank links to lock the mold & Strong clamping force;
8. Automatic and manual operation;
9. Different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
10. With unique design of the valve position, which is reliable and safe, the air pressure diagram of the machine can be easy to understand;
11. The screw diameter is 90mm;
12. Applicable materials: PP, PVC, PE, PC, PS; the max blow volume: 30L;

13. Our machine can be used in making of auto parts, chemical barrels, pesticide sprayer and so on.

90H1x1.30D For Engineering parts Example bottle 20L, 1200g
One station, one cavity blow moulder up to 30L Output 45/hr, 1100 /day, 0.38million/year

Technical Data

1. General Features

Carriage horizontal shuttle stroke mm /
Dry cycle sec 3"
Clamp force kN 450
Pressure of Hydraulic System Mpa 14
Pressure of Pneumatic System Mpa 0.6-0.8
Pressure of Cooling System Mpa 0.2-0.3
Air consumption (estimated) M3 / hr 5
Minimum pressure for cooling water to machine Mpa 0.2
Power of pump motor for hydraulic movements kW 15
Power of servo pump motor(if needed) kW (5.5)
power of Die head heating kW 16
Power of knife kW /
Total power installed (estimated, maximum) kW  85.5

2. Extruders

Screw diameter  mm 90
Extruder rotating speed / 20~65
Power of electric motor kW 37
Power of barrel heating kW 17.5
Max throughput = PE kg/h 160

3. Mould Dimensions

Maximum Width A mm 700
Maximum Length B mm 650
Minimum Depth C mm 250
Clamp Open Max. Daylight D mm 900
Open Stroke E mm 450
Max Weight of Mould   kg 600

4. Production Possibilities

Cavities   1
Max center distance mm /
Max container width mm 700
Max container height mm 500
Max container depth mm 340
Container capacity (estimated) lt 30

5. Machine Dimensions

Maximum width mm 2830
Maximum length mm 4900
Maximum height mm 3500
Total weight kg 9250

We provide our costums one year warranty for the 30L extrusion blowing molding machinery, free installation for domestic market, charging for debugging in international market and lifetime services. The replacement of 30L extrusion blowing molding machinery parts is one year for free, expect the rapid wear parts.

Add: No. 1 Xinhui Road, Wusha, Daliang, Shunde, Foshan, Guangdong, P.R.China

Email: overseas@china-leshan.com; COUNT